1. General Description
The specification is a transmissive type color active matrix liquid crystal display (LCD) which uses amorphous thin film transistor (TFT) as switching devices. This product is composed of a TFT-LCD panel, driver Icsand a backlight unit.

 2. Module Parameter

Features	Details	Unit
Display Size(Diagonal)	8.0”
LCD type	IPS TFT
Display Mode	Transmissive/normally black
Resolution	1024*(RGB)x768	Pixels
View Direction	FULL VIEW	Best Image
Module Outline	175.26(H) x142(V) x 2.95(T)  (Note1 )	mm
Active Area	162.05(H) x121.54(V)	mm
Pixel Size	158(H)x158(V)	um
Pixel Arrangement	R.G.B. Vertical Stripe
Surface treatment	Hard coating
Display Colors	16.7M
Interface	6 bit/8 bit -LVDS interface
With or Without Touch Panel	Without
Operating Temperature	-20～70	ºC
Storage Temperature	-30～70	ºC
Weight	142	g

Note 1: Exclusive hooks, posts , FFC/FPC tail etc.
 3.Absolute Maximum Ratings
V_SS=0V, Ta=25ºC

Item	Symbol	Min.	Max.	Unit
Supply Voltage	VDD	(-0.3)	(5.0)	V
	AVDD	(6.5)	(13.5)	V
	VGH	(-0.3)	(VGL+40.0)	V
	VGL	(-20.0)	(0.3)	V
Storage temperature	Tstg	-30	+70	ºC
Operating temperature	Top	-20	+70	ºC

Note 1: If Ta below 50ºC, the maximal humidity is 90%RH, if Ta over 50ºC, absolute humidity should be less than 60%RH.
Note 2: The response time will be extremely slow when the operating temperature is around -10℃, and the back ground will become darker at high temperature operating.
 4. DC Characteristics

Item	Symbol	Min.	Typ.	Max.	Unit
Supply Voltage	VDD	(3.0)	(3.3)	(3.6)	V
	AVDD	(9.8)	(10)	(10.2)	V
	VGH	(18.6)	(18.9)	(19.2)	V
	VGL	(-8.1)	(-7.8)	(-7.5)	V
Input signal voltage	VCOM	(2.6)	(3.6)	(4.6)	V
Input logic high voltage	VIH	(0.7*VDD)	-	(VDD)	V
Input logic low voltage	VIL	0	-	(0.3*VDD)	V
Current Consumption All White	ICC+IIN	-	TBD	-	mA

Note 1:Be sure to apply VCC and VGL to the LCD first,and then apply VGH
Note 2:VCC setting should match the signal output voltage (refer to Note 3)of customer’s system board
Note 3:Typical Vcom is only a reference value ,it must be optimized according to each LCM
Note 4:DCLK,HS,VS,RSTB,UPDN,STLR,MODE,DITHB
 5. Backlight Characteristic

5.1.   Backlight Characteristic

Item	Symbol	Condition	Min	Typ	Max	Unit
Forward Voltage	VF	Ta=25ºC,IF=20mA	-	9.8	-	V
Forward Current	IF	Ta=25ºC, VF=9.8V	-	240*2	-	mA
Power dissipation	Pd		-	4704	-	W
Uniformity	Avg		65	-	-	%
Drive method	Constant current
LEDConfiguration	72 White LEDs (3 LEDs in one string and 12 groups in parallel)*2