1. General Description
       The specification is a transmissive type color active matrix liquid crystal display (LCD) which uses amorphous thin film transistor (TFT) as switching devices. This product is composed of a TFT-LCD panel, driver Ics, RTP ,a backlight unitand a driver PCBA.

 2.Module Parameter

Features	Details	Unit
Display Size(Diagonal)	7.0”
LCD type	TN TFT
Display Mode	Transmissive/ Normally White
Resolution	800RGB x480	Pixels
View Direction	12 O’CLOCK	Best Image
Gray Scale Inversion Direction	6 O’CLOCK
Module Outline	190.4(H) x105.4(V) x 18MAX(T)  (Note1 )	mm
Active Area	154.08(H) x85.92(V)	mm
Pixel Size	192.6x179	um
Pixel Arrangement	RGB Vertical stripe
Display Colors	65K （16bit 5R6G5B）
Interface	UART
With or Without Touch Panel	With RTP	-
Operating Temperature	-10～60	ºC
Storage Temperature	-20～70	ºC
Weight	（310）	g

Note 1: Exclusive hooks, posts, FFC/FPC tail etc.  

3.Absolute Maximum Ratings

     V_SS=0V, Ta=25ºC

Item	Symbol	Min.	Max.	Unit
Supply Voltage	Vin	5	24	V
Storage temperature	TSTG	-20	+70	ºC
Operating temperature	TOP	-10	+60	ºC

Note 1:If Ta below 50ºC, the maximal humidity is 90%RH, if Ta over 50ºC, absolute humidity should be less than 60%RH.
Note 2:The response time will be extremely slow when the operating temperature is around -10℃, and the back ground will become darker at high temperature operating.

4. DC Characteristics

Item		Symbol	Min.	Typ.	Max.	Unit
Supply Voltage		Vin	5	12	24	V
UART output level	Output1，Iout=1mA		3.0	3.2	-	V
	Output0，Iout=-1mA		-	0.1	0.2	V
UART input level	Input1，Iin=1mA		2.0	3.3	15.0	V
	Input0，Iin=-1mA		-0.7	0	1.3	V
Supply Current	Vin＝＋12V， Maximum backlight brightness		-	230	-	mA
	Vin＝＋12V， Backlight off			110		mA

Note：Recommend DC power supply：least 12V 1A DC Power
 5. Backlight Characteristic

5.1.Backlight Characteristic

Item	Symbol	Condition	Min.	Typ.	Max.	Unit
BacklightVoltage	VLED	Ta=25ºC,IF=20mA/ LED		-		V
BacklightCurrent	ILED	Ta=25ºC, VF=3.2V/LED		-		mA
Power dissipation	PD	-		-		mW
Uniformity	Avg	-		-		%
LED working life(25℃)	-			-		Hrs
Drive method	Constant current
LEDConfiguration	TBD

Note1：LED life time defined as follows: The final brightness is at 50% of original brightness.
The environmental conducted under ambient air flow, at Ta=25±2ºC,60%RH±5%, I_F=20mA/LED.