1.General Description
       The specification is a transmissive type color active matrix liquid crystal display (LCD) which uses amorphous thin film transistor (TFT) as switching devices. This product is composed of a TFT-LCD panel, driver ICs and a backlight unit.

2.Module Parameter

Features	Details	Unit
Display Size(Diagonal)	5.0”
LCD type	TN TFT
Display Mode	Transmissive/Normally White
Resolution	640 RGB x480	Pixels
View Direction	12 O’CLOCK	Best Image
Gray Scale inversion direction	6 O’CLOCK
Module Outline	117.65(H) x88.43(V) x 5.7(T) (Note1 )	mm
Active Area	101.568 (H) x76.176(V)	mm
Pixel Pitch	158.7(H) x158.7(V)	um
Pixel Arrangement	RGB Vertical Stripe
Display Colors	16.7M
Interface	24 bit RGB Interface
With or Without Touch Panel	Without
Operating Temperature	-20～70	ºC
Storage Temperature	-30～80	ºC
Weight	73	g

Note 1: Inclusive hooks, posts, FFC/FPC tail etc.
 3.Absolute Maximum Ratings
                                                                      GND=0V, Ta=25ºC

Item	Symbol	Min.	Max.	Unit
Power supply voltage	DVDD	-0.3	5.0	V
	AVDD	6.5	13.5	V
	VGH	-0.3	42	V
	VGL	-20	0.3	V
Storage temperature	TSTG	-30	+80	ºC
Operating temperature	TOP	-20	+70	ºC

 
Note 1:If Ta below 50ºC, the maximal humidity is 90%RH, if Ta over 50ºC, absolute humidity should be less than 60%RH.
Note 2:The response time will be extremely slow when the operating temperature is around -10℃, and the back ground will become darker at high temperature operating.
  4.DC Characteristics

Item	Symbol	Min.	Typ.	Max.	Unit
Supply Voltage	DVDD	3.0	3.3	3.6	V
	AVDD	10.2	10.4	10.6	V
	VGH	16.7	17.0	17.3	V
	VGL	-7.3	-7.0	-6.7	V
Input signal voltage	VCOM	3.2	3.5	3.8	V
Logic Lowinput voltage	VOL	0	-	0.3*VDD	V
Logic High input voltage	VOH	0.7*VDD	-	VDD	V

Note 1: Typical VCOM is only a reference value, it must be optimized according to each LCM, please use VR and base on below application circuit.
Note 2: Be sure to apply GND, DVDD, and VGL to the LCD first, and then apply VGH.

 

Item	Symbol	Values			Unit	Remark
		Min.	Typ.	Max.
Current for Driver	IGH	-	160	-	uA	VGH=+17V
	IGL	-	160	-	uA	VGL=-7V
	ICC	-	8	-	mA	DVDD=3.3V
	IDD	-	10	-	mA	AVDD=10.4V

 
 5.Backlight Characteristic

5.1.  BacklightCharacteristics

 

Item	Symbol	Condition	Min.	Typ.	Max.	Unit
Forward Voltage	VF	Ta=25ºC,IF=20mA/LED	-	15.5	-	V
Forward Current	IF	Ta=25ºC, VF=3.1V/LED	-	60	-	mA
Power dissipation	PD	-	-	930	-	mW
Uniformity	Avg	-	70	75	-	%
Drive method	Constant current
LEDConfiguration	15 White LEDs( 5 LEDs in one string and 3 groups in parallel)