1. General Description
     The specification is a transmissive type color active matrix liquid crystal display (LCD) which uses amorphous thin film transistor (TFT) as switching devices. This product is composed of a TFT-LCD panel, driver Icsand a backlight unit.

 2.  Module Parameter

Features	Details	Unit
Display Size(Diagonal)	7.0”
LCD type	TN TFT
Display Mode	Transmissive/ Normally White
Resolution	800RGB x480	Pixels
View Direction	12 O’CLOCK	Best Image
Gray Scale Inversion Direction	6 O’CLOCK
Module Outline	165(H) x100.05(V) x 3.3(T)  (Note1 )	mm
Active Area	154.08(H) x85.92(V)	mm
Pixel Size	192.6x179	um
Pixel Arrangement	RGB Vertical stripe
Polarizer SurfaceTreatment	Anti-glare
Display Colors	16.7M
Interface	24bits-RGB Interface
With or Without Touch Panel	Without	-
Operating Temperature	-20～70	ºC
Storage Temperature	-30～80	ºC
Weight	113	g

Note 1: Exclusive hooks, posts, FFC/FPC tail etc.
 3.  Absolute Maximum Ratings
           V_SS=0V, Ta=25ºC

Item	Symbol	Min.	Max.	Unit
Digital Supply Voltage	DVDD	-0.3	5.0	V
Analog Supply Voltage	AVDD	6.5	13.5	V
Gate On Voltage	VGH	-0.3	40	V
Gate Off Voltage	VGL	-20	0.3	V
Storage temperature	TSTG	-30	+80	ºC
Operating temperature	TOP	-20	+70	ºC

Note 1:If Ta below 50ºC, the maximal humidity is 90%RH, if Ta over 50ºC, absolute humidity should be less than 60%RH.
Note 2:The response time will be extremely slow when the operating temperature is around -10℃, and the back ground will become darker at high temperature operating.
 4. DC Characteristics

Item	Symbol	Min.	Typ.	Max.	Unit
Digital Supply Voltage	DVDD	3.0	3.3	3.6	V
Analog Supply Voltage	AVDD	10.2	10.4	10.6	V
Gate On Voltage	VGH	15.3	16	16.7	V
Gate Off Voltage	VGL	-7.7	-7.0	-6.3	V
Common Voltage	VCOM	2.6	(3.6)	4.6	V
Logic Input Voltage	VIL	GND	-	0.3*DVDD	V
	VIH	0.7*DVDD	-	DVDD	V

Note: Typical VCOM is only a reference value. It must be optimized according to each LCM. Please use VR.
 5. Backlight Characteristic
5.1 Backlight Characteristic

Item	Symbol	Condition	Min.	Typ.	Max.	Unit
BacklightVoltage	VLED	Ta=25ºC,IF=20mA/ LED	-	9.6	-	V
BacklightCurrent	ILED	-	-	120	-	mA
Power dissipation	PD	-	-	1152	-	mW
Uniformity	Avg	-	-	80	-	%
LED working life(25℃)	-		-	20,000	-	Hrs
Drive method	Constant current
LEDConfiguration	18 White LEDs( 3 LEDsin stringand 6 groups in parallel)

Note1：LED life time defined as follows: The final brightness is at 50% of original brightness.
The environmental conducted under ambient air flow, at Ta=25±2ºC,60%RH±5%, I_F=20mA.