1. General Description
       The specification is a transmissive type color active matrix liquid crystal display (LCD) which uses amorphous thin film transistor (TFT) as switching devices. This product is composed of a TFT-LCD panel, driver ICs , a touch panel and a backlight unit.

 2.Module Parameter

Features	Details	Unit
Display Size(Diagonal)	7.0”
LCD type	TN TFT
Display Mode	Transmissive/ Normally White
Resolution	800RGB x480	Pixels
View Direction	12 O’CLOCK	Best Image
Gray Scale Inversion Direction	6 O’CLOCK
Module Outline	164.9(H) x100(V) x 6.9(T) (Note1)	mm
Active Area	154.08(H) x85.92(V)	mm
Pixel Size	182.6x179	um
Pixel Arrangement	RGB Vertical stripe
Polarizer SurfaceTreatment	Anti-glare
Driver IC	EK9713CA & EK73002A
Display Colors	16.7M
Interface	24bits-RGB Interface
With or Without Touch Panel	With	-
Operating Temperature	-20～70	ºC
Storage Temperature	-30～80	ºC
Weight	TBD	g

Note 1: Exclusive hooks, post, FFC/FPC tail etc.
 3. Absolute Maximum Ratings
      V_SS=0V, Ta=25ºC

Item	Symbol	Min.	Max.	Unit
Power supply voltage	DVDD	-0.3	5.0	V
Storage temperature	TSTG	-30	+80	ºC
Operating temperature	TOP	-20	+70	ºC

Note 1:If Ta below 50ºC, the maximal humidity is 90%RH, if Ta over 50ºC, absolute humidity should be less than 60%RH.
Note 2:The response time will be extremely slow when the operating temperature is around -10℃, and the back ground will become darker at high temperature operating.
 4. DC Characteristics

Item	Symbol	Min.	Typ.	Max.	Unit
Supply Voltage	DVDD	3.0	3.3	3.6	V
Analog power voltage	AVDD	10.2	10.4	10.6	V
Gate On Voltage	VGH	15.3	16.0	16.7	V
Gate Off Voltage	VGL	-7.7	-7.0	-6.3	V
Common Electrode Driving Signal	VCOM	3.4	3.8	4.6	V
Logic Low input voltage	VIL	GND	-	0.3*DVDD	V
Logic High input voltage	VIH	0.7*DVDD	-	DVDD	V

Note 1: Typ. VCOM is only a reference value it must be optimized according to each LCM. Be sure to use VR.
 5. Backlight Characteristic

5.1.   Backlight Characteristic

Item	Symbol	Condition	Min.	Typ.	Max.	Unit
BacklightVoltage	VLED	Ta=25ºC, IF=20mA/LED	-	9.6	-	V
BacklightCurrent	ILED	Ta=25ºC, VF=3.2V/LED	-	180	-	mA
Power dissipation	PD	-	-	1728	-	mW
Uniformity	Avg	-	80	-	-	%
Drive method	Constant current
LEDConfiguration	27 White LEDs( 3 LEDsin one stringand 9groups in parallel)