1. General Description

       The specification is a transmissive type color active matrix liquid crystal display (LCD) which uses amorphous thin film transistor (TFT) as switching devices. This product is composed of a TFT-LCD panel, driver ICs , RTP and a backlight unit.

2. Module Parameter

Features	Details	Unit
Display Size(Diagonal)	10.1”
LCD type	TN TFT
Display Mode	Transmissive/Normally White
Resolution	1024RGB x600	Pixels
View Direction	12 O’CLOCK	Best Image
Gray Scale Inversion Direction	6 O’CLOCK
Module Outline	235(H) x143(V) x6.1(T)  (Note1 )	mm
Active Area	222.72(H) x125.28(V)	mm
Pixel Pitch	217.5(H) x208.8(V)	um
Pixel Arrangement	RGB Vertical stripe
Polarizer SurfaceTreatment	Anti-glare
Driver IC	HX8282-A & HX8696-A
Display Colors	262K
Interface	LVDS Interface
With or without the touch panel	With
Operating Temperature	-20～70	ºC
Storage Temperature	-30～80	ºC
Weight	330	g

Note 1: Inclusive hooks, posts, FFC/FPC tail etc.
 3.  Absolute Maximum Ratings
           V_SS=0V, Ta=25ºC

Item	Symbol	Min.	Max.	Unit
Digital Supply Voltage	DVDD	-0.5	+3.96	V
	AVDD	-0.5	+14.85	V
	VGH	-0.3	+42.0	V
	VGL	VGH-42	+0.3	V
Storage temperature	TSTG	-30	80	ºC
Operating temperature	TOP	-20	70	ºC

Note 1:If Ta below 50ºC, the maximal humidity is 90%RH, if Ta over 50ºC, absolute humidity should be less than 60%RH.
Note 2:The response time will be extremely slow when the operating temperature is around -10℃, and the back ground will become darker at high temperature operating.
 4. DC Characteristics

Item		Symbol	Min.	Typ.	Max.	Unit
Supply Voltage		DVDD	3.0	-	3.6	V
		AVDD	6.5	10.8	13.5	V
		VGH	(16)	21	(26)	V
		VGL	(-13)	-8	(-3)	V
Input signal voltage		VCOM	-	3.7	-	V
Logic Low input voltage		VIL	0	-	0.3*DVDD	V
Logic High input voltage		VIH	0.7*DVDD	-	DVDD	V
Logic Lowoutput voltage		VOL	-	-	GND+0.4
Logic High output voltage		VOH	DVDD-0.4	-	-
Current Consumption All Black	Logic	ICC+IIN	-	TBD	-	mA
	Analog

Note 1: All of the voltage listed above are with respective to GND = 0v
Note 2:Device is subject to be damaged permanently if stresses beyond those absolute maximum rating listed above
 5.  Backlight Characteristic

5.1.   Backlight Characteristic

Item	Symbol	Condition	Min.	Typ.	Max.	Unit
Forward Voltage	VF	Ta=25ºC,IF=20mA/LED	8.4	9.4	10.2	V
Forward Current	IF	Ta=25ºC, VF=3.3V/LED	-	180	-	mA
Power dissipation	PD	-	-	1692	1836	mW
Uniformity	Avg	-	80	-	-	%
LED working life(25℃)	-		-	20,000	-	Hrs
Drive method	Constant current
LEDConfiguration	27 White LEDs( 3 LEDsin one stringand 9groups in parallel)

Note1：LED life time defined as follows: The final brightness is at 50% of original brightness.
The environmental conducted under ambient air flow, at Ta=25±2 ºC,60%RH±5%, I_F=20mA.