1.General Description

     The specification is a transmissive type color active matrix liquid crystal display (LCD) which uses amorphous thin film transistor (TFT) as switching devices. This product is composed of a TFT-LCD panel, driver ICs and a backlight unit.
 2.Module Parameter

Features	Details	Unit
Display Size(Diagonal)	10.1”
LCD type	IPS TFT
Display Mode	Transmissive/Normally Black
Resolution	1024RGB x600	Pixels
View Direction	FULL VIEW
Module Outline	235(H) x143(V) x4.5 (T)  (Note1 )	mm
Active Area	222.72(H) x125.28(V)	mm
Pixel Pitch	217.5(H) x208.8(V)	um
Pixel Arrangement	RGB Vertical stripe
Display Colors	16.7M color
Interface	24bit RGB
With or without the touch panel	Without
Operating Temperature	-30~85	ºC
Storage Temperature	-30~85	ºC
Weight	TBD	g

Note 1: Inclusive hooks, posts, FFC/FPC tail etc.
 3.Absolute Maximum Ratings
        V_SS=0V, Ta=25ºC

Item	Symbol	Min.	Max.	Unit
Power Supply Voltage	VDD	-0.3	5	V
Storage temperature	TSTG	-30	85	ºC
Operating temperature	TOP	-30	85	ºC

Note 1:If Ta below 50ºC, the maximal humidity is 90%RH, if Ta over 50ºC, absolute humidity should be less than 60%RH.
Note 2:The response time will be extremely slow when the operating temperature is around -10℃, and the back ground will become darker at high temperature operating.
 4.DC Characteristics

Item	Symbol	Min.	Typ.	Max.	Unit	Note
Supply Voltage	DVDD	3.0	3.3	3.6	V
	AVDD	12	12.5	13	V
	VGH	19.5	20	20.5	V
	VGL	-10.5	-10	-9.5	V
	VCOM	5	5.4	5.8	V	Note 1
Input signal Voltage	ViH	0.7DVDD	-	DVDD	V
	VIL	0	-	0.3DVDD	V
Current (All White)	Ivdd	-	TBD	-	mA

Note 1: Vcom must be adjusted to optimize display quality Crosstalk, Contrast Ratio and etc
 5.Backlight Characteristic

5.1.   Backlight Characteristic

 

Item	Symbol	Condition	Min.	Typ.	Max.	Unit
Forward Voltage	VF	Ta=25ºC,IF=20mA/LED	14	16	17	V
Forward Current	IF	Ta=25ºC, VF=3.2V/LED	-	160	-	mA
Power dissipation	PD	-	-	2560	-	mW
Uniformity	Avg	-	-	70	-	%
Drive method	Constant current
LEDConfiguration	40 White LEDs( 5 LEDsin one stringand 8groups in parallel)