1.      General Description
       The specification is a transmissive type color active matrix liquid crystal display (LCD) which uses amorphous thin film transistor (TFT) as switching devices. This product is composed of a TFT-LCD panel, driver Ics and a backlight unit.

 2. Module Parameter

Features	Details	Unit
Display Size(Diagonal)	11.0’’
LCD type	TN TFT
Display Mode	Transmissive/ Normally White
Resolution	1280RGB x120	Pixels
View Direction	6 O’clock	Best Image
Gray Scale Inversion Direction	12 O’clock
Module Outline	288.92(H) x41.2(V) x (7.2)(T)  (Note1 )	mm
Active Area	280.32 (H) x 27.0(V)	mm
Pixel Pitch	219(H) x225(V)	um
Pixel Arrangement	RGB Vertical Stripe
Display Colors	262K
Interface	18-bit RGB Interface
With or Without Touch Panel	Without	-
Controller IC	HX8290-A02 and HX8678-C01
Operating Temperature	-10～60	ºC
Storage Temperature	-20～70	ºC
Weight	100	g

Note 1: Exclusive hooks, posts, PCB, FFC/FPC tail etc.
 3. Absolute Maximum Ratings
V_SS=0V, Ta=25ºC

Item	Symbol	Min.	Max.	Unit
Logic Supply Voltage	VDD	-0.3	3.6	V
Storage temperature	TSTG	-20	+70	ºC
Operating temperature	TOP	-10	+60	ºC

Note 1: If Ta below 50ºC, the maximal humidity is 90%RH, if Ta over 50ºC, absolute humidity should be less than 60%RH.
Note 2: The response time will be extremely slow when the operating temperature is around -10℃, and the back ground will become darker at high temperature operating.
  4. DC Characteristics

Item	Symbol	Min.	Typ.	Max.	Unit
Supply Voltage	VDD	-	3.3	-	V
Logic Low input voltage	VIL	0	-	0.2*VDD	V
Logic High input voltage	VIH	0.8*VDD	-	VDD	V
Logic Low output voltage	VOL	0	-	0.2*VDD	V
Logic High output voltage	VOH	0.8*VDD	-	VDD	V
Input Current	Idd	-	TBD	-	mA

 

5. Backlight Characteristic

5.1.     BacklightCharacteristics

Item	Symbol	Condition	Min.	Typ.	Max.	Unit
Forward Voltage	VLED	Ta=25ºC,IF=20mA/LED	9.0	9.6	10.5	V
Forward Current	ILED	Ta=25ºC, VF=3.2V/LED	-	180	-	mA
Power dissipation	PD		-	1728	-	mW
Uniformity	Avg		70	-	-	%
LED working life(25℃)	-		-	30,000	-	Hrs
Drive method	Constant current
LEDConfiguration	27White LEDs (3 LEDs in one string and 9 groups in parallel)

Note1：LED life time defined as follows: The final brightness is at 50% of original brightness.
The environmental conducted under ambient air flow, at Ta=25±2ºC,60%RH±5%, I_F=20mA

1. General Description
    The specification is a transmissive type color active matrix liquid crystal display (LCD) which uses amorphous thin film transistor (TFT) as switching devices. This product is composed of a TFT-LCD panel, driver ICs and a backlight unit.

 2. Module Parameter

Features	Details	Unit
Display Size(Diagonal)	6.5”
LCD type	TN  TFT
Display Mode	Transmissive/Normally White
Resolution	800RGB x480	Pixels
View Direction	12 O’clock	Best Image
Gray Scale Inwersion Direction	6 O’clock
Module Outline	155.2(H) x89.4(V) x 2.8(T) (Note1 )	mm
Active Area	143.4 (H) x 76.7(V)	mm
Pixel Pich	179.25(H) x159.8(V)	um
Pixel Arrangement	RGB stripe
Polarizer SurfaceTreatment	Anti-Glare
Display Colors	16.7 M
Interface	24-bits RGB Interface
With or without touch panel	Without
Operating Temperature	-20～60	ºC
Storage Temperature	-30～70	ºC
Weight	TBD	g

Note 1: Exclusive hooks, posts , FFC/FPC tail etc.
 3. Absolute Maximum Ratings
V_SS=0V, Ta=25ºC

Item		Symbol	Min.	Max.	Unit
Supply Voltage	Logic	DVDD	-0.3	5.0	V
	Analog	AVDD	6.5	13.5	V
Gate On Voltage		VGH	-0.3	40	V
Gate Off Voltage		VGL	-20	0.3	V
Storage temperature		TSTG	-30	+70	ºC
Operating temperature		TOP	-20	+60	ºC

Note 1: If Ta below 50ºC, the maximal humidity is 90%RH, if Ta over 50ºC, absolute humidity should be less than 60%RH.
Note 2: The response time will be extremely slow when the operating temperature is around -10℃, and the back ground will become darker at high temperature operating.
 4. DC Characteristics
(1)Operating Conditions

Item		Symbol	Min.	Typ.	Max.	Unit
Supply Voltage	Logic	DVDD	3.0	3.3	3.6	V
	Analog	AVDD	10.2	10.2	10.6	V
Gate On Voltage		VGH	15.3	16.0	16.7	V
Gate Off Voltage		VGL	-7.7	-7.0	-6.3	V
Common Voltage		VCOM		4.0		V(Note1)
Input Signal Voltage	Low Level	VIL	0	-	0.3*DVDD	V
	High Level	VIH	0.7*DVDD	-	DVDD	V
Current Consumption All Black	Logic	ICC+IIN	-	TBD	-	V
	Analog

Note1:Please adjust VCOM to make the flicker level be minimum.
 5.Backlight Characteristic

5.1.   Backlight Characteristic

Item	Symbol	Condition	Min	Typ	Max	Unit
Forward Voltage	VF	Ta=25ºC,IF=20mA/LED	-	9.3	10.5	V
Forward Current	IF	Ta=25ºC, VF=3.1/LED	-	80	-	mA
Power dissipation	PD		-	744	-	mW
Uniformity	Avg		70	75	-	%
Drive method	Constant current
LEDConfiguration	12 White LEDs(3 LEDs in one string and 4 groups in parallel)